| Technical Data |
Description |
| Hole Diameter |
6.5"(Continuous)9",10" and 12"(Over burden) 8"(Continuous)12 1⁄4"(Reaming) |
| Depth |
100 Meters |
| Truck |
25.280 or 2516 / 2518 / As per customer request |
| Prime Mover |
Truck Engine |
| Truck |
25.280 or 2516 / 2518 / As per customer request |
| Application |
Water Well Drilling Rig |
| Formation |
Soft / Hard / unconsolidated / Alluvial |
| Mast |
Hydraulic cylinder with pulley and wire rope. | Maximum Pull up force - 8500 kgs | Maximum Pull down force - 4500 kgs | Reeving Ratio 1:3s | Maximum Pull up | |speed - 45 meter / minutes | Maximum Pull down speed - 60 meter / minute |
| Head |
Max speed: 0- 170rpm | Maximum Torque: 300 kg.m |
| Hydraulic system |
Maximum Working pressure 210 kg/cm2 | Pumps: Load sensing |
| Hydraulic Oil Cooler |
70gpm |
| Break out Wrench |
Maximum Torque: 500kg.m2 | Cylinder bore: 80mm / 100mm | Stroke: 300mm / 350mm |
| Leveling Jacks |
Four Hydraulic levelling jacks |
| Water Injection Pump |
Triplex Reciprocating Pump Powered by Hydraulic Motor |
| Optional Attachments |
Shock sub | Stem lock | Hole sweeper | Dust collector | Digital controls | Auto drilling | Auto Rod charger | GPS system | Driller AC cabin | Data logging system | Welding generator | Six Rod Carousal & Mud Pump. |
| Rod Changer |
Manually operated rod changer to handle single rods with 1000 kgs. Capacity pull up winch to carry drill rods, casings and hammer tools |
| Mast Raising Cylinder |
Bore: 100mm2 | Stroke: 800mm | Quantity: 2 No's |
| Air Compressor |
Atlascopco XRH 1000 cfm - 300 psi or 1000 cfm - 275psi / As per customer request |
| Air Line Lubricator |
18 liters |
| Mud Pump |
Capacity: 41⁄2” X5" | Linear size: 41⁄2” | Stroke : 5" | Flow : 500 lpm | Pressure : 17.21 bar |
