HAND PUMPS

Technical Data Description
DEEP WELL HAND PUMPS MS EXTRA DEEP WELL pumps DEEP WELL HAND PUMPS EXTRA DEEP WELL PUMPS IM III DEEP WELL HAND PUMPS GHANA MODIFIED DEEP WELL HAND PUMP INDIA MARK II DEEP WELL HAND PUMP
MANUAL FORCE LIFT HAND PUMPS MANUAL FORCE LIFT HAND PUMPS
DTH HAMMER PARTS DRILLING ADOPTER
HAND PUMP ACCESSORIES HAND PUMP TOOLS MARK 2 CYLINDER ASSEMBLY HAND PUMP PARTS
DTH DRILLING RODS DTH DRILLING RODS
BRONZE AND BRASS COMPONENTS BRASS BUSH BRONZE BUSH
HAND PUMP CONNECTING RODS CONNECTING ROD FOR HAND PUMP HAND PUMP CONNECTING ROD SS CONNECTING ROD
VALVE ASSEMBLIES LOWER VALVE ASSEMBLY UPPER VALVE ASSEMBLY VALVE ASSEMBLY
GI PIPES GI PIPES

1. DEEP WELL HAND PUMPS

We are offering Deep Well Hand Pumps. We are engaged in manufacturing and supplying a wide range of Deep Well Hand Pumps which are made up of qualitative raw material. A robust constructed Deep Well Hand Pumps can also be customized as per the mentioned specifications of our esteemed customers.

Product Details :

Model Name/Number IS-15500-EDWHP
Brand Ind Tech
Material MS
Discharge 800 LPH
Cylinder 60-90 mtr
Riser Pipes 32 mm

The Extra deep well hand pump set consists of the followings :

  • • Pump head
  • • Heavier sq. Section (40mm) handle Assembly fixed with bearings (2 Nos.), T-Bar and (3 nos.of triangular counter weights)
  • • Chain with coupler
  • • Third plate (intermediate flange)
  • • Water tank assy. with 32mm (1-1/4”) R.P.Holder
  • • Stand assy. normal
  • • Optional telescopic stand assy.
  • • Connecting rod, mild stl. Electro Galvanised (10 Nos.) Option-connecting rod SS (10 Nos.)
  • • Riser pipe 32 mm (1 ¼”) NB with socket (10 Nos.)
  • • Set of hex bolts and nuts

Product Details :

Brand Afridev
Material Stainless Steel
Size 1.2 m
Discharge 900 LPH
Operating Depth 50 m
Installation/After Sales Service Not Provided
Warranty Period 12 Months

With the experience acquired by UNICEF in association with UNDP, World Bank water and Sanitation Program in partnership with hand pump field workers and developmental organizations, it has designed the Deep well hand pump that has become a choice in number of countries across Africa and Asia.

Note : If the hand pump is used for dug wells, then the suitable provision must be made for location, the rising mains and to modify the suction pipe if required. A concise description of the pump sub-assemblies and components are as under

Components :
  • • Pump head
  • • Handle front
  • • Handle rear
  • • Rod hanger
  • • Rod hanger pin
  • • Fulcrum pin
  • • Bearing bushes inner & outer with cover

EXTRA DEEP WELL PUMPS

Product Details :

Head 1.2 m
Model Name/Number EDW
Brand Ind Tech
Material MS
Operating Depth 300 ft
Max Flow Rate 900 LPH

We are one of the leading manufacturer and supplier of the comprehensive range of Extra Deep Well Pump. The product is the result of the hard work of our team of experts, who specially designed the product for the rural/unskilled operation and are apt for depths of up to 90 meters. These Deep Wells are fabricated using high grade steels, and have heavier handle with a t-bar and additional weight ensures reduced pumping efforts.

Note : Range available

IM III DEEP WELL HAND PUMP

Product Details :

Discharge 900 LPH
Model Name/Number VLOM-BIS-15500,Mark III
Material MS
Head 1.2 m
Brand Ind Tech

This IM III Deep Well Hand Pump is known as VLOM 65(2.5 inch) and VLOM50(2") which is suitable for village level operational maintenance, the above ground structure is same as I M II Deep Well Hand Pump, it is used for lifting water from deep set bore holes covering Static Water Level (SWL) that ranges from 20 meters to 30 meters.

Set of hand pump assemby consists of:

  • • Pump head
  • • Handle assy. fixed with bearings (2 Nos.)
  • • Chain with coupler assy
  • • Third plate (Intermediate Flange)
  • • Water tank assembly with 50mm NB Riser pipe holder
  • • Connecting rod mild Steel Electro GALVANIZED (10 Nos.) Optional stainless steel con.rods (10 Nos.)
  • • Stand assembly normal Optional stand assembly telescopic
  • • Compression cone plate
  • • Compression rubber cone-Nitrile
  • • Riser pipe 50 NB (2” NB) (10 Nos)
  • • Riser pipe centralizer (5 Nos.)
  • • Cylinder assy. OTC (Open Top Cylinder)

GHANA MODIFIED DEEP WELL HAND PUMP

Product Details :

Head 1.2 m
Material MS
Discharge 800 LPH
Operating Depth 150 ft
Bore Diameter 100 mm

Features

  • • The Chain Link conversion head is made of galvanized steel and is equipped with double-sealed flange bearings. Flange bearing are used for the handle support.
  • • The spout of the water tank shall be made of 2 inch nominal diameter pipe. The pipe holder in the water tank shall be welded to a smaller flange. Adequate sealing is provided.
  • • The pump body shall have a base plate with four foundation bolt holes exactly 9 inches square (i.e. 228.6mm) and a diameter of 20mm (Bore size) to conform to the CWSA Ghanaian standards.
  • • The pump stand will be fixed on a ground fixing assembly with a suitable rubber gasket The foundation bolts shall be of ø 16mm, length 160mm with at least 30m thread at the upper end. The foundation bolts are welded on a frame of steel rods. The four ø 16mm, length 160mm foundation bolts have to fit the above mentioned foot flange. The ground fixing assembly has to be brought in position in the fresh concrete, so that a minimum of 30mm of thread remains out of the concrete.
  • • Riser Pipe with tip-stretched (not welded-on) spigot (male end) and socket (female end), for connection purposes furnished with male/female Rope Thread at pipe and to avoid wear and tear between the rods and pipes during operation a centralizer is to be provided.
  • • The 10.8 mm dia stainless steel pump rods for the connection to the above mentioned GMIMKII reciprocating hand pumps shall have rolled on threads.The full brass pump cylinder shall be assembled for the employment together with the above – mentioned components that are the above ground system the lightweight riser pipes and stainless steel pump rods.

INDIA MARK II DEEP WELL HAND PUMP

Product Details :

Minimum Order Quantity 50 Piece
Head 1.2 m
Model Name/Number Mark II
Brand Ind Tech
Material MS
Discharge 900 LPH

This Hand Pump is widely used in rural areas it is commonly called India Mark II Deep Well Hand Pumps. In this pump the connecting rod and riser pipe will be of three meters long each.

Hand Pump Consist Of:

  • • Pump head Hot Dip Galvanized
  • • Handle assembly, fixed with bearings (2 Nos.)
  • • Chain with coupler assembly
  • • Third plate (intermediate flange)
  • • Water tank with 32mm NB (1-1/4”) riser pipe holder
  • • Connecting rod MS Electro Galvanized (10 Nos.) Option-stainless steel con. rods (10 Nos.)
  • • Cylinder assembly (CI body fitted with brass liner
  • • Stand assembly
  • • Option-telescopic stand assembly
  • • Set of Hex bolts and buts
  • • Riser pipe 32mm (1.1/4) NB with socket (10)